Synthetic wigs, especially if they are long or very long, deteriorate due to friction (rubbing the nape of the neck, shoulders, scarves, collars, scarves …). If you can’t renew it, there are tricks to soften the fiber of synthetic wigs and leave it almost like new! Mind you, the length of the fix is somewhat temporary, but it can save you for a couple more weeks of use without having to buy a new synthetic wig.
Most importantly, maintenance is first of all. If we regularly apply a specific mask for synthetic wigs, the duration of the fiber in good condition will be longer than if we do not use anything.
This trick can only be done with heat resistant fiber wigs. If your wig does not admit heat, the result would be disastrous and it would spoil much more.
1) Brush the wig to remove tangles from middle to ends.
2) When the wig is old and damaged by rubbing, immerse in hot water and apply a scoop of concentrated fabric softener that we use for clothing. Wait 15 to 30 min before rinsing thoroughly.
3) Dry with the dryer at medium temperature and leave the synthetic wig wet in the most damaged areas.
4) While still damp from medium to ends (humidity is important), divide into small locks and start by passing the iron at medium temperature (140 degrees). Increase the temperature gradually until you see that the frizz is mitigating and the fiber softer.
5) Never raise the temperature of the iron more than 180 degrees.
6) Pass the iron until the wig is completely dry.
The fiber should be softer, the ends more sealed and more manageable for about two more weeks.